Fireproof melamine decorative flexible interior wall panels
Product Description
Fireproof melamine decorative flexible interior wall panelsFireproof mgo decorative flexible interior wall panels with waterproof
Fire-resistant Feature:
We use patented technology to penetrate and stick directly.
The surface of the board is directly laminated with melamine paper, without any interlayer in the middle, which improves the fire resistance level. It has no formaldehyde, no phenolic glue, high bonding strength, and good fire resistance. , Is a national A-level (national standard) fireproof board, the flame lasts for zero burning time, 800 ℃ does not burn, 1200 ℃ no flame, in line with the national A-level fire protection standards, the fire resistance limit reaches more than 4 hours, can be absorbed in the process of burning A large amount of heat energy prevents the fire from spreading and delays the increase of the surrounding temperature.
Waterproof Feature:
Our Melamine surface decorative magnesium oxide board can be boiled for 4 hours without the layers unfloding. In dry, cold and sloping weather, the performance is always stable, unaffected by condensed water droplets and vertical air, even if it is soaked in water for several days, it can be used normally after being recovered from naturally dried. It will not be deformed and affect the strength,and there're no No water droplets,no condensation phenomenons.
A1: MgO Board is a strong, high quality, fire-proof, mineral-based building material used to replace plywood, fiber cement panels, OSB and gypsum wallboards. It is an extremely versatile product for use with interior and exterior construction. It is mading from bonding certain elements (including MgO nesium and oxygen) which results in an extremely strong cement-like material. Similar compounds have been used for construction purposes for hundreds of years in such world-famous sites such as the Great Wall of China, Rome's Pantheon, and extensively throughout one of the world's tallest buildings, Taipei 101.
A2: MgO Board is a unique, cost-effective building material available across the U.S. The product has been engineered to resolve some of the toughest building challenges faced by architects, contractors, installers, builders and consumers. These include resistance to fire, moisture, mold, mildew, fungus and insects.
Q3: What are the various applications of MgO Board?
A3: MgO Board is an extremely versatile product and can be used in many applications both interior and exterior.
Exterior Applications: Interior Applications: Specialty Applications:
Wall sheathing Wall panels Office cubicles
Fascia Ceiling Board Room dividers
Soffit Tile backer Structural Insulated Panels (SIPS)
Trim Drop ceiling tiles
Lap Siding Fire wall system
Q4: What dimensions are commonly used to define MgO Panels?
A4: MgO Panels are sold in standard 4 × 8 ft sheets and in multiple thickness:3/6/8/12/15/18mm.
How Are MgO Boards Produced?
Most magnesium carbonite comes from China and Europe. The process combines magnesium and oxygen with pressure and heat to create magnesium oxide (MgO). The MgO has the characteristics of stone after heating. After being ground into powder, it gets mixed with water, chloride, and sulfate (or Epsom salts) and wood dust (cellulose), perlite, and a handful of other materials.
Product Series
Lightweight energy-saving composite wall panels, floors, fireproof decorative panels, exterior wall hanging panels, anti-corrosion insulation tiles, magnesium oxide flat panels, Magnesium Oxysulfate sanded panels, etc.
Production process: no industrial "three wastes", no toxic substance discharge.
Finished products: fire resistance, high temperature resistance, no release of toxic substances, fully environmentally friendly products, superior performance.
Installation Tools
Install the boards horizontally (crosswise to the profiles) in staggered joints, with the rough surfaces turned outwards, then screw them to the metal framework with special highly corrosion resistant MGO Screws (Ruspert type treatment with salt spray resistance exceeding 1.000 hours) positioned at a maximum centre distance of 200 mm. Leave a space of 3-4 mm between the board edges, filling the space when the first coat of filling is applied.
FILLING
The joints between the boards must be filled with the outdoor filler, MGO Filler Dry, which should also be used to finish the surface. Apply one 2-3 mm coating of filler interposing the alkali-resistant reinforcement tape; allow filler to dry then smooth off and finish.
FINISHING
Finish the surface with the same product MGO Filler Dry used to fill the joints, laying a coat of about 3 mm; bury the alkali-resistant glass fibre mat into the finishing coat, overlapping the edges by at least 10 cm. Wait for 24 hours, then apply the second finishing coat if necessary. Before applying any other finishing material, allow the finishing filler to dry and harden for at least 24 hours.
INSTALLING THE FINISHING PROFILES
Fix the PVC finishing profiles (edge beams, drips, expansion joint covers, cornices etc.) burying them into the mat on the finishing deck and overlapping the same over the edges of the alkali-resistant glass fibre mat. In particular cases, the profiles may be fixed to the metal sub-structure with the same screws used to fix the boards, or may be fixed to the boards with metal clips.
INSTALLING THE EXPANSION JOINTS
Expansion joints should be installed at every 6 m; joints should also be installed in the following cases:
- at the expansion joints of the building.
- at the floor division of the building.
- at points of variations of the materials of the structure or facing of the building.
The metal support framework should in any case be interrupted at the expansion joints.
Packing and Shipment
1.Strong plywood pallet 2.Strapped with PET rope
3.Protect corner & edges 4.PE film covered on the 6 surfaces
Contact us
Whatsapp/wechat: +86 18264133237(Amy Zhang) +86 18754133238(Linjing Zhao)
Email: amy AT sdlceat.com
Product Categories : MgO Decorative Board > 3mm Decorative Board